Ignition coil problems on Audi A3 and A4 TFSI models
The turbocharged petrol engines in the Audi A3 and A4, the 1.4, 1.8 and 2.0 TFSI, use a separate coil on each cylinder. When one fails, the engine misfires on that cylinder and you may see hesitation, a rough idle, lost power and the engine management light or the EPC light. We diagnose Audi misfires at our Audi specialist workshop in Bristol. For how coils work across the VAG range, see our VAG ignition coil guide.
Misfire codes on an Audi
| Code | What it points to |
|---|---|
| P0300 | Random or multiple cylinder misfire |
| P0301 to P0304 | Misfire on cylinder 1 to 4 |
| P0351 to P0354 | Ignition coil circuit fault on cylinder 1 to 4 |
A code is a starting point. The same misfire code can come from the coil, the plug, an injector or an air leak, which is why we confirm the cause.
Symptoms on an A3 or A4
- A judder, worse when accelerating hard or under boost.
- A rough idle.
- The engine light on, or flashing during a bad misfire.
- The EPC light and reduced power.
- Poorer economy and a smell of fuel.
Why TFSI coils and plugs work hard
A turbo engine under boost needs a stronger spark because the cylinder pressure is higher. Worn plugs with a wider gap make the coil work harder, and the extra stress shortens its life. That is why coil and plug condition go together on these engines, and why running a TFSI with overdue plugs often leads to a failed coil. Oil in the plug wells from a leaking valve cover gasket can also damage coils.
Other causes of an Audi misfire
- Worn spark plugs.
- A leaking or failing injector.
- A split intake or boost pipe, or a faulty crankcase ventilation valve.
- Carbon build-up on the intake valves of direct-injection engines.
- Low compression, which is less common but serious.
How we diagnose it at our Bristol workshop
We read the codes with our VAG diagnostics, view the misfire count on each cylinder while the engine runs, and swap a suspect coil to another cylinder to see whether the misfire follows it. We inspect the plugs and the wells. Then we tell you the cause. Our Audi engine management light guide covers other causes of the light, and our Audi MAF sensor guide covers the air side.
What the repair involves
The repair is a new coil or coils, with plugs where they are due, or whatever the testing shows is at fault. We use the correct parts for your engine and talk through the options, including our view on genuine and aftermarket VAG parts. Afterwards we clear the fault and road test the car. See our mechanical repairs page for more of our work.
Audi misfire diagnosis in Bristol and the surrounding area
We look after Audi owners across Bristol and the surrounding area. Send the registration, engine, mileage and whether the light is flashing through our contact page. If it is flashing, ease off and tell us first.
Frequently asked questions
Should I replace all four coils?
Not necessarily. We test them and replace the ones that have failed.
Can I drive with the EPC light on?
Usually carefully to a workshop, but power may be reduced. If the engine light flashes, reduce load and get it checked quickly.
Why do coils fail on turbo engines?
Higher cylinder pressure and heat stress them, and worn plugs add to it.

